Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
| Description | Quantity | Pot Life | Part Number | Price | Buy |
|---|---|---|---|---|---|
| PR2032 Resin | Quart | - | 01-42125 | $55.75 | |
| PR2032 Resin | 3/4 Gallon | - | 01-42140 | $146.75 | |
| PR2032 Resin | 5 Gallon | - | 01-42155 | $737.00 | |
| PR2032/PH3660 Kit | Quart Kit | 1 Hour | 01-42135 | $76.85 | |
| PR2032/PH3660 Kit | Gallon Kit | 1 Hour | 01-42150 | $205.95 | |
| PR2032/PH3660 Kit | Pail Kit | 1 Hour | 01-42165 | $970.00 | |
| PH3630 Hardener | Pint | 30 Minutes | 01-00160 | $23.50 | |
| PH3630 Hardener | Quart | 30 Minutes | 01-00161 | $61.85 | |
| PH3660 Hardener | Pint | 1 Hour | 01-42130 | $23.50 | |
| PH3660 Hardener | Quart | 1 Hour | 01-42145 | $59.95 | |
| PH3660 Hardener | 2 Gallon | 1 Hour | 01-42160 | $234.95 | |
| PH3663 Hardener | Pint | 90 Minutes | 09-05266 | $21.50 | |
| PH3663 Hardener | Quart | 90 Minutes | 09-05267 | $59.95 | |
| PH3663 Hardener | 2 Gallon Pail | 90 Minutes | 09-05268 | $265.95 | |
| PH3663 Hardener | 30-Gallon Drum | 90 Minutes | 09-05269 | $1976.00 | |
| PH3665 Hardener | Pint | 2 Hours | 01-00162 | $23.50 | |
| PH3665 Hardener | Quart | 2 Hours | 01-00163 | $61.95 |
- JUMP TO
- Overview
- Documents
- Reviews
- Q&A
- View in Catalog
Overview
|
PR2032 is a medium viscosity, unfilled, light amber laminating resin that is designed for structural production applications. Three hardeners are available for use with PR2032. PH3660, has a 1-hour pot life. When used with either of these hardeners, the system gives excellent wet-out of fiberglass, carbon and aramid fibers. Special additives have been incorporated into this system to promote chemical adhesion to fabrics made with these fibers. The AEROPOXY systems will cure completely at room temperature, or can be given an elevated temperature cure. AEROPOXY contains no MDA (a known liver toxin and carcinogen) and meets or exceeds current OSHA requirements for safe use. It satisfies all structural, pot life and wet-out characteristics according to tests by Rutan Aircraft Factory, and RAF recommended its use for all homebuilt aircraft applications. The best ratio on AEROPOXY is 100:27 by weight or 3 to 1 by volume. In early 1996 several improvements were made to AEROPOXY. The viscosity was lowered for easier laminating, the occasional slight surface tackiness in high humidity was eliminated, the AEROPOXY hardeners were modified to prevent any tendency to crystallize in high humidity, and the mix ratios were modified to an exact 3 to 1 by volume. |
Documents
- Tech Data Sheet (PDF)
Reviews
Verified Purchase
PR2032/PH3660 QUART KIT
Worked as expected.
Verified Purchase
PR2032/PH3660 QUART KIT
Aero-poxy is the finest epoxy I have ever used. I have never had am issue using this product. In fact, its the only eopxy I will use. It matters not what your project call for, Aero-poxy has the right mix for piece of mind and confidence in my final product. .
Verified Purchase
PR2032/PH3660 GALLON KIT
Excellent product. Easy to use. The pot life is long enough to execute any elaborate layup.
Verified Purchase
PR2032/PH3660 QUART KIT
AeroPoxy is a wonderful epoxy! We have used it a lot, and wil continue to use it. The Spruce Service is OUTSTANDING as always! GREAT PRODUCTS, GREAT SERVICE. Way to go Aircraft Spruce!
Verified Purchase
PR2032/PH3660 QUART KIT
Have not opened this one yet, but I suspect it is actually 1/3 qt vs a full pint, which is fine, as you dont need any more to mix with a quart of resin.. Same comment: i.e. description should say 1/3 qt if that is what it is..
Verified Purchase
AEROPOXY PH3630 HARDNR 1 PINT
exactly as ordered, delivered fast
Verified Purchase
PR2032 RESIN QUART
Im coming to love AeroPoxy. Im building a Cozy with MGS epoxy for the structure and West epoxy for finishing and non-structural odd jobs. I decided to do the wheel pants in AeroPoxy and got great performance. The product penetrates well, making for good layups, and cures nice and hard. Where cured West layups will still delaminate, the AeroPoxy locks on. The gallon kit is affordable and ACS brought it to Sun-N-Fun for free.
Order was shipped quick and packaging was great
This Product should be kept fresh for the Consumer, It had settled out, and needed to be stirred
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
24hr, at room temp, is recommended. Heat can be applied to accelerate the cure time. Please see the Tech Data Sheet under the "Documents" tab for more info.
They do not come with pumps but you can use the west system pumps on the Aeropoxy kit. P/N# 01-00318.
Acetone is commonly used for cleaning un-cured epoxies. We also have Replacetone, 01-08823, which is a non-haz cleaner for un-cured epoxies.
As long as the hardeners have the same ratio they can be blended. 3630/3660/3665 are all 100:27.
Yes, this is safe to use with closed-cell polystyrene foam.
